Cable distributor kit with aluminium distributor

Consisting of :

Art: 101200 Cable distributor aluminium

Art: 100190 Bowden cable cover 5 mm with sliding inner tube (3 pcs. 1.5 metres each)

Art: 100711 Wire rope 1.25 mm ( 7×7) with longitudinal nipple 3.2 mm x5 mm ( 3 pcs. a 2 metre long)

Art: 100120 Sheet metal sleeve (6 pcs.)

Art: 100159 Adjusting screw M 6 ( thread length 24 mm ) ( 3 pcs. )

Art: 100350 Nut M 6 DIN 439 narrow version (6 pcs.)

Art: 100073 Soldering nipple length diameter 3,2 x5 mm ( 3 pcs. )

Art: 101413 Soldering nipple cross diameter 6×6 mm ( 3 pcs. )

Art: 101414 Soldering nipple cross diameter 6×4 mm ( 3 pcs. )

Art: 101415 Soldering nipple cross diameter 6×7 mm ( 3 pcs. )

The DuoControl actuation kit is a cable pull distributor that actuates 1 cable from 2 different points.

This can also be described as an or actuation.

Technical information :

The DuoControl has a stroke of 15 mm

The housing is made of galvanised steel

The lower sliding sleeve is made of stainless steel and is mounted in a Teflon-coated sliding bush.

Functionality :

1 actuation :

The upper cable, which goes into the adjusting screw, is actuated by means of a handle, causing the cable to contract and push the small slide with the spring and ball in the direction of the adjusting screw. This pulls back the black cover underneath and the single cable that goes out to the right is shortened and thus actuated.

2 Actuation :

The handle on the lower black cover is actuated, which pulls the rope that goes out to the right directly and thus actuates it.

The kit consists of :

1 pc. 102477 Duo Control assembly

3 pcs. 1.5 metres each 100190 Bowden cable sheath 5 mm

4 metres 100174 Wire rope 1.5 mm 1×19

1 pc.100544 Wire rope with ball 5 mm

2 pcs. 100121 Sheet metal sleeve

For the connection, e.g. operating handles and locking bolts can be used.

If you have any technical questions, please contact our technician 074238752573

Set of screw connections for cable distributor 101771

Consisting of:

2x End terminal M 6 x38
4x nut DIN 239 M6
1x end terminal M 8 x 108 (can be shortened as desired)
2x nut DIN 439 M 8
3x sheet metal end sleeve for Bowden cable sleeves
3x adjusting screw M 12
6x nut DIN 439 M 12

Tip :
Suitable cable and sleeve would be :
 
Rope: 100203 (rope 3 mm construction 1×19) ART No.: 100203
Bowden cable sheath: 10 mm with inner tube Art. No. 100202

Kit for cable distributors with plastic distributor

Consists of :

Art: 101233 cable distributor plastic

Art: 100190 Bowden cable sleeve 5 mm with sliding inner tube  (3 pieces of 1.5 meters each)

Art: 100711 Wire rope 1.25 mm (7×7) with longitudinal nipple 3.2 mm x5 mm (  3 pieces, each 2 meters long)

Art: 100120 sheet metal sleeve (6 pcs.)

Art: 100159 adjusting screw M 6 (thread length 24 mm) (3 pcs.)

Art: 100350 nut M 6 DIN 439 narrow version (6 pieces)

Art: 100073 Solder nipple length diameter 3.2 x5 mm ( 3 pcs.)

Art: 101413 Solder nipple cross diameter 6×6 mm ( 3 pcs.)

Art: 101414 Soldering nipples across, diameter 6×4 mm (3 pcs.)

Art: 101415 Soldering nipples, transverse, diameter 6×7 mm (3 pcs.)