Cleanroom Aluminium Spray is a high-quality spray that is also used in electroplating workshops to touch up galvanised components.

Thanks to the pure aluminium, the spray also provides excellent protection against corrosion in the long term

Properties:
Consists of 99.5% pure aluminium
; heat-resistant up to 800 °C
; metallic sheen

Lubricant for lubricating and preserving wire ropes

Area of application:

Lubricates and preserves wire ropes 

Applications:

For wire ropes, Bowden cables and ropes for pulleys

Advantages:

Reduces noise

Prevents jerky start-up

Protects against corrosion and wear

No embrittlement in cold conditions

Tough and elastic, and water-resistant

Virtually drying lubricating film – does not attract dust

Highly penetrating rust remover with special additives.

Applications:

For dismantling parts that are rusted, burnt or stuck together
On screws, bolts, fittings, guides, levers, slide rails and bearings. To prevent squeaking, creaking and seizing. For protection against corrosion and wear. For maintenance, inspection and repair.
•Rust-loosening, rust-removing, corrosion-protecting
•High creeping and penetrating ability
•Wash- and rinse-active
•Effectively displaces moisture and dampness
•Conditions and protects
•Does not resinify or stick together
•Compatible with paint, rubber and plastics
•Penetrates rust and loosens even severely seized screws
•Provides long-lasting protection against further rust formation
Advantages:

Thanks to the addition of special additives based on OMC² technology, arecal Rostex offers decisive advantages:

1. The product’s extreme penetrating power and speed, thereby saving time.

2. Additional lubrication provided by the added additives, thereby reducing wear on the treated parts.

3. Long-lasting corrosion protection, as the oils it contains evaporate only slowly.

Note:

This information is provided for guidance only, based on our experience. Preliminary tests by the user are always required.

arecal Foam Cut cutting oil foam is a highly activated, high-performance cutting oil for the most demanding machining operations, which forms a well-adhering oil foam when applied to the workpiece.

 

Applications:

arecal Foam Cut is ideal for thread cutting, thread drilling, centring, broaching and reaming with reamers, drilling and milling.

The range of applications covers all ferrous and non-ferrous metals, e.g. steel (unalloyed or alloyed), all types of castings: cast steel, malleable cast iron, die-castings, as well as copper and its alloys, such as cast brass and red brass, and also all chromium-nickel alloys.

Advantages:

The product is sulphur-free and free from mineral oils.

As it can be easily washed off with clean water, there is no need for time-consuming degreasing processes using, for example, organic solvents.

Note:

The special formulation of arecal Foam Cut ensures compatibility with all water-miscible cooling lubricants.