HHM – 70 Hydraulic press tool without tool inserts l
Pressing pressure 35 tonnes
Weight : 37,5 KG
Dimensions : 330x220x390 mm

Eyelet for rope 3 mm (head 18 mm, bore 10.5 mm, width 8 mm, total length 42 mm)

Material : Galvanised steel

Eyelet with eye diameter 3.5 mm suitable for rope 1.5 mm

eye width is 4 mm

Shank diameter is 5 mm

Material galvanised steel

Drawbar eye 5.0 x 20 x bore 1.4 eye 5.3

Fits rope 1.25 mm

Material : Free cutting steel

Dimensions :

Total length : 20 mm

Shank length : 9 mm

Shank diameter : 5 mm

Hole eye : 5,3 mm

Eye width : 1.6 mm

Rope bore : 1.4 mm

Ring eyelet with eye diameter 8.1 mm suitable for rope 2.0 mm

Eye width 6.0 mm, total length 23 mm, shaft diameter 6 mm

Ring eyes for rope 1.25 mm

Eye diameter :3.6mm

Eye width : 0.7 mm

Head diameter : 6.0 mm

Shaft length: 7 mm

Overall length:  13.7 mm

Material : Steel

Ring eyes for rope 2.0 mm

Eye diameter :5 mm

Eye width : 1.5 mm

Head diameter : 10.8 mm

Shaft length: 15 mm

Overall length:  29.5 mm

Material : Steel

Ring eyes for rope 2.0 mm

Eye diameter :7 mm

Eye width : 1.5 mm

Head diameter : 10.8 mm

Shaft length: 15 mm

Overall length:  29.0 mm

Material : Steel

Ring eyes for rope 1.5 mm

Eye diameter :7 mm

Eye width : 2.0 mm

Head diameter : 11.0 mm

Shaft length: 13 mm

Overall length:  26.5 mm

Cable bore: 1.6 mm

Hole depth: 10.5 mm

Material : Steel

Ring eyes for rope 5.0 mm

Eye diameter :12 mm

Eye width : 6.3 mm

Head diameter : 26.5 mm

Shaft length: 25 mm

Overall length :  56 mm

Cable bore : 5.2 mm

Hole depth : 18 mm

Material : Steel

Ring eyes for rope 2.5 mm

Eye diameter :13 mm

Eye width : 4 mm

Head diameter: 20.4 mm

Shaft length: 20 mm

Overall length :  45.5 mm

Cable bore : 2.7 mm

Hole depth: 20 mm

Material : Steel

Manual crimping tool for rope ends

For use in a vice

With this pressing tool, threaded rods and eyelets can be pressed quickly and easily.

Application :

– Insert the tool in the vice

– Push the part to be pressed onto the rope

– Press on 2 notches at the beginning and end of the rope and then press on again in the center of the notches, rotated by 180 °

The depth of the notches and thus the strength of the pressing depends on the type of rope and the part to be pressed. We point out that it is a tool for non-safety-relevant parts.

Ring eyelet with eye diameter 4.5mm suitable for rope 1.5 mm

Eye diameter: 4.5 mm

Eye width: 2.0 mm

Overall length: 15.5 mm

Shaft diameter: 4.5 mm

Hole for rope: 1.7 mm

Hole depth: 6.0 mm

Ring eye with 2.0 mm eye diameter suitable for 1.25 mm rope

Eye diameter: 2.0 mm

Eye width: 3.0 mm

Overall length: 13.0 mm

Shaft diameter: 3.0 mm

Hole for rope: 1.4 mm

Hole depth: 8.5 mm

Ring eyelet with 8.3 mm eye diameter suitable for 1.5 mm rope

Eye diameter: 8.3 mm

Eye width: 4.5 mm

Overall length: 20.0 mm

Shaft diameter: 4.5 mm

Hole for rope: 1.7 mm

Hole depth: 8.0 mm

Ring eye with eye diameter 5.1 mm suitable for rope 1.5 mm

Eye diameter: 5.1 mm

Eye width: 4 mm

Overall length: 18.5 mm

Shaft diameter: 5 mm

Hole for rope: 1.7 mm

Hole depth: 8.5 mm

Eyelet with bore 5.4 mm suitable for rope up to 2 mm.

Dimensions:

Total length: 19 mm

Drilling Diameter 5.4 mm

Head Width: 1.1 mm

Head Outside Diameter 8.5 mm

Eyelet with bore 5 mm suitable for rope 1,0 mm, 1,25 mm, 1,5 mm, 2 mm.

Dimensions:

Total length: 33 mm

Drilling Diameter 5 mm

Head Width: 1.5 mm

Tab width: 10 mm

Material: stainless steel 1,4301

The installation of the eyelet with the rope is very simple. Slide in the rope and the eylet in the vice until the rope lies wave-shaped in the tab. Attention not too strong so that the rope is sheared off.

Eyelet suitable for rope 2.5 mm and 3 mm.

Dimensions:

Total length 76.5 mm

Eye width 16mm

Eye thickness 6.5mm

Bore Eye 8.2 mm

Eyelet suitable for rope 2.5 mm and 3 mm (for 3mm rope, drill out ot 3.2mm)

Shaft diameter 8 mm

Eyelet suitable for rope 3.5 mm

Dimensions:

Total length 64 mm

Eye width 16mm

Eye thickness 6.5mm

Bore Eye 8.2 mm

Eyelet suitable for rope 3.5 mm and 4 mm (for 4mm rope, drill out ot 4.2mm)

Shaft diameter 8 mm

Eyelet suitable for rope 2.5 mm and 3 mm.

Dimensions:

Total length 46 mm

Eye width 14.5 mm

Eye thickness 5 mm

Bore Eye 8.0 mm

Eyelet suitable for rope 2.5 mm and 3 mm (for 3mm rope, drill out ot 3.2mm)

Shaft diameter 6 mm

Eyelet suitable for rope 2.5 mm and 3 mm.

Dimensions:

Total length 34.5 mm

Eye width 12 mm

Eye thickness 6 mm

Bore Eye 6.1 mm

Eyelet suitable for rope 2.5 mm and 3 mm (Bore 2.9mm, for 3 mm rope drill out to 3.2mm)

Shaft diameter 6 mm

Eyelet suitable for rope 2.5 mm and 3 mm.

Dimensions:

Total length 34.0 mm

Eye width 12 mm

Eye thickness 6 mm

Bore Eye 6.1 mm

Eyelet suitable for rope 2.5 mm and 3 mm (bore 1.9mm)

Shaft diameter 8 mm

Eyelet suitable for rope 1.5 mm

Dimensions:

Total length 33.5 mm

Eye width 16 mm

Eye thickness 4 mm

Bore Eye 7 mm

Suitable for rope 1.5 mm (bore 1.9 mm)

Shaft diameter 6 mm

Eyelet suitable for rope 4 mm

Dimensions:

Total length 34.6 mm

Eye width 16.1 mm

Eye thickness 6.5mm

Bore Eye 8.2 mm

Eyelet suitable for rope 4 mm

Shaft diameter 8 mm

Eyelet suitable for rope 3.5 mm and 4 mm.

Dimensions:

Total length 34.6 mm

Eye width 16.1 mm

Eye thickness 6.5mm

Bore Eye 8.2 mm

Eyelet suitable for rope 3.5 mm and 4 mm (for 4mm rope, drill out to 4.2mm)

Shaft diameter 8 mm

Eyelet suitable for rope 3 mm

Dimensions:

Total length 34.6 mm

Eye width 16.1 mm

Eye thickness 6.5mm

Bore Eye 8.2 mm

Eyelet suitable for rope 3 mm

Shaft diameter 8 mm

Eyelet suitable for rope 2.5 mm and 3 mm.

Dimensions:

Total length 34.6 mm

Eye width 16.1 mm

Eye thickness 6.5mm

Bore Eye 8.2 mm

Eyelet suitable for rope 2.5 mm and 3 mm (for 3mm rope, drill out ot 3.2mm)

Shaft diameter 8 mm

Eyelet with bore 4.4 mm suitable for rope up to 2 mm.

Dimensions:

Total length: 18 mm

Drilling Diameter 4.4 mm

Head Width: 1.5 mm

Head Outside Diameter 8 mm

Eyelet with eye diameter 6.5 mm suitable for rope 2.0 mm

Eye width 6.5 mm, total length 23 mm, shaft diameter 6 mm

Eyelet with eye diameter oblong 6 mm x15 mm suitable for rope 2.5 mm

Width of the eye 5 mm

Shaft diameter 8 mm

Ring eyelet with eye diameter 6 mm suitable for rope 1.5 mm

Ring eyelet with eye diameter 5.1mm suitable for rope 1.5 mm

Eye width is 5 mm

Shaft diameter is 5 mm