Longitudinally stranded spiral 4.8 mm outside, 1.8 mm inside suitable for spring steel wire 1.25 and 1.5 mm

Push rope stainless steel for pull and push actuation

Push-pull rope, flat band armoured, outer diameter 2 mm

Push-pull ropes are used for the transmission of push and pull forces

Outer diameter 2 mm

Material : Stainless steel wire armoured wire rope bright

Suitable cover :

Art : 100317 ( Push-pull sheath 6 mm outer diameter)

Spring steel wire DIN EN 10270-1-D1 Diameter: 1.25 mm

Longitudinally stranded spiral 9 mm outside, 3.5 mm inside

Switching wire rope 2.0 mm ( 1×7) zn k 2160 s (galvanised steel)

Diameter 2.1 mm

Construction : 1×7

Material galvanised steel

Special features :

The wire rope consists of 6 individual strands and a rigid wire in the centre. This makes the rope very rigid and is suitable for smaller pressure transmissions such as gearsticks in motor vehicles.

Riser cable for pressure transmission 2.5×4.7×2.54×1.2 mm

Inclined cables are used to transmit compressive and tensile forces

Dimensions :

Wire rope : 2.5 mm

Wrapping : 1.2 mm spring steel wire

pitch : 2.54 mm

Outer diameter : 4.7 mm

Material : Bright spring steel wire

Matching Bowden cable sheath : Longitudinally stranded sheath diameter 10 mm ( art no. 100281)

Riser cable for pressure transmission 2.8×6.05×3.38×1.6 mm

Inclined cables are used to transmit compressive and tensile forces

Dimensions :

Wire rope : 2.8 mm

Wrapping : 1.6 mm spring steel wire

Pitch distance : 3.38 mm

Outer diameter : 6.05 mm

Material : Bright spring steel wire

Shift cable for motor vehicles

Tension – compression cable flat band armoured outer diameter 3.2 mm

Push-pull cables are used to transmit compressive and tensile forces

Outer diameter 3.2 mm

Material : Spring steel armoured steel wire bright

Suitable cover :

Art : 102556 ( push-pull sleeve 9 mm outer dimension)

Tension – compression rope flat band armoured outer diameter 4.7 mm

Push-pull ropes are used to transmit compressive and tensile forces

Outer diameter 4.7 mm

Material :

Wire rope 3.0 mm longitudinally stranded with plastic coating

Suitable cover :

Art : 102638 ( push-pull sheath 11 mm outer dimension)

Tension compression sleeve Longitudinal stranded 11 mm Outer diameter 5.5 mm inside

Outer diameter 11 mm

Inner diameter 5.5 mm

Suitable wire rope :

Art : 102637 ( push-pull rope 4,7 outer diameter)

Tension compression sleeve Longitudinal stranded 11.5 mm Outer diameter 6.5 mm inside

Outer diameter 11.5 mm

Inner diameter 6.5 mm

Matching wire rope :

Art : 102587 ( push-pull rope 6,05 outer diameter)

Longitudinally stranded spiral 4.1 mm outside, 1.7 mm inside

suitable for spring steel wire 1.25 mm and wire rope up to 1.25 mm

We recommend end sleeves Art: 100125 (chamfer spirals well since the sleeves fit snugly)

Spring steel wire 2.5 mm diameter according to DIN EN 10270-1-D1

Recommendation:

Flat wire spiral 100210

'

Spring steel wire 1.0 mm diameter according to DIN EN 10270-1-D1

Recommended flat wire spiral 3.8 mm Art: 100189 and 100188 '

Spring steel wire 2.0 mm diameter according to DIN EN 10270-1-D1

Recommendation:

Flat wire spiral type: 100193

'

Spring steel wire 1.5 mm diameter according to DIN EN 10270-1-D1

Recommendation: Longitudinally sheathed outer offers more rigidity during pressure transmission, but only large radii are possible, here the article 100317 fits

For light pressure transfers the flat wire spiral Article: 100190 is sufficient

'

Spring steel wire 0.9 mm diameter according to DIN EN 10270-1-D1

Recommended flat wire spiral 3.8 mm Art: 100189 and 100188 '

Longitudinally twisted spiral 10 mm outside, 5.0 mm inside

Longitudinally twisted spiral 7 mm outside, 3.0 mm inside to match spring steel wire 2.0 mm and 2.5 mm

Longitudinally twisted spiral 7 mm outside, 2.3 mm inside to match spring steel wire 1.5 mm

Longitudinally twisted spiral 6.3 mm outside, 2.3 mm inside to match spring steel wire 1.5 mm