Brake Cable Disributor Hub 25mm max

DuoControl actuation is a cable pull distributor that actuates 1 cable from 2 different points.

This can also be described as an or actuation.

Technical information :

The DuoControl has a stroke of 15 mm

The housing is made of galvanised steel

The lower sliding sleeve is made of stainless steel and is mounted in a Teflon-coated sliding bush.

Functionality :

1 actuation :

The upper cable, which goes into the adjusting screw, is actuated by means of a handle, causing the cable to contract and push the small slide with the spring and ball in the direction of the adjusting screw. This pulls back the black cover underneath and the single cable that goes out to the right is shortened and thus actuated.

2 Actuation :

The handle on the lower black cover is actuated and the cable that goes out to the right is pulled directly and thus actuated.

Matching accessories :

100190 Bowden cable cover 5 mm

100174 Wire rope 1.5 mm 1×19

100544 Wire rope with ball 5 mm

100121 Sheet metal sleeve (2x)

For the connection, e.g. operating handles and locking bolts can be used.

If you have any technical questions, please contact our technician 074238752573

Cable distributor for 3 mm cable, stable design
Material Niro (1.4301)

Technical information on the item and accessories:

Item number for Set with screws and threads : Art : (101772)
Recommended rope : 3 mm rope 1×19 galvanized ( Art. No. : 100203 )
Recommended sheath : Flat wire spiral with inner tube ( Art. No. 100202)< br />
Reference dimensions :

Carrier :
Total length : 190 mm
Front width : 45 mm
Back width : 65 mm
Component height: 35 mm
Material thickness: 3 mm
Hole diameter on the holder: 14 mm
Hole spacing at the back: 40 mm
Distance of screwing holes at the back: 40 mm for M 6
Distance between screwing holes at front: 30 mm for M 6
Distance between screwing holes at rear in front: 153 mm 

Sliding carriage:

Bore diameter  6.5 mm 2x for rope attachment
Hole diameter 9 mm 1x for rope attachment
Hole spacing: 40 mm
Material thickness 3 mm

Other information:

Stroke: approx. 60 mm
Caution: assembly of the sliding carriage as shown in the picture.
The long flange of the sliding carriage must point with the large holes to the underside of the carrier and the long tab must point to the side with the 2 mounting holes.