Threaded Rod M4x22 Bore 1.7 mm
Threaded Rod M4x22 Bore 1.7 mm
1.68 €
incl. 19% VAT plus shipping
Threaded Rod: M4 x 22 mm
Material: steel galvanized
Dimensions:
Thread: M 4
Thread length in mm: 11
Total length in mm: 22
Drilling diameter in mm: 1.7
Drilling depth in mm: 10
Shaft diameter in mm: 4
Mengenrabatt / Discount
| Bulk Price | Quantity (from) | Quantity (to) |
| 1.68 € | 1 | 19 |
| 1.55 € | 20 | 49 |
| 1.27 € | 50 | 99 |
| 1.13 € | 100 | 249 |
| 1.01 € | 250 | 499 |
| 0.67 € | 500 | 999 |
| 0.44 € | 1,000 | ∞ |
immediately available
delivery time: 2-5 working days
express delivery after consultation by phone
Related products
-

Wage Service Pressing On One Side Of The Rope
SKU: 102048We would be happy to press the nipple on one side of your rope.
Please book this service as well if you want us to press the nipple onto your wire or rope.The price refers to 1 rope
When ordering, enter the amount of ropes you want the nipples to be crimped on.When squeezing, the shapes of the nipples change as follows :
Longitudinal nipples / trumpet nipples are pressed as a hexagon.
Cross nipples are pressed on the front side via point pressure, the diameter increases slightly as a result of the pressing.
details
10.65 €incl. 19% VAT
plus shipping
Add to basket -

HHM – 70 Hydraulic press tool without pressing tools
SKU: 102921HHM – 70 Hydraulic press tool without tool inserts l
Pressing pressure 35 tonnes
Weight : 37,5 KG
Dimensions : 330x220x390 mmdetails
775.51 €incl. 19% VAT
plus shipping
Add to basket -

Threaded Rod M4 x 34 Bore 1.2 mm
SKU: 101278Threaded Rod: M4 x 34 mm
Material: steel galvanized
Dimensions:
Thread: M 4
Thread length in mm: 23
Total length in mm: 34
Drilling diameter in mm: 1.2
Drilling depth in mm: 10
Shaft diameter in mm: 4
details
1.90 €incl. 19% VAT
plus shipping
Add to basket -

Manual crimping tool for rope ends from 4 – 8 mm
SKU: 101440Manual crimping tool for rope ends
For use in a vice
With this pressing tool, threaded rods and eyelets can be pressed quickly and easily.
Application :
– Insert the tool in the vice
– Push the part to be pressed onto the rope
– Press on 2 notches at the beginning and end of the rope and then press on again in the center of the notches, rotated by 180 °
The depth of the notches and thus the strength of the pressing depends on the type of rope and the part to be pressed. We point out that it is a tool for non-safety-relevant parts.
details
25.93 €incl. 19% VAT
plus shipping
Add to basket
Weitere Artikel die Sie interessieren könnten...
-

Reinforced retro Bowden cable housing 4.9 / 2.2 mm for cable 1.5 mm
SKU: 103058Reinforced retro Bowden cable housing 4.9 / 2.2 mm
Suitable for
Cable 1.5 mm ( Art No.: 100174 or 100175 )
Matching end sleeve : Art no. : 100121
Dimensions :
Inside 2,2 mm
Outside 4.9 mm
Coating : Cotton painted blackFaithful reproduction of an old Bowden cable housing in accordance with DIN 71 987 (May 1943).
A high-quality spring steel spiral braided with natural cotton and a deep black, silky gloss coating.
The look is very similar to the original old cable housing.details
11.22 €incl. 19% VAT
plus shipping
Add to basket -

Cable pull distributor kit with aluminium distributor
SKU: 102463Cable distributor kit with aluminium distributor
Consisting of :
Art: 101200 Cable distributor aluminium
Art: 100190 Bowden cable cover 5 mm with sliding inner tube (3 pcs. 1.5 metres each)
Art: 100711 Wire rope 1.25 mm ( 7×7) with longitudinal nipple 3.2 mm x5 mm ( 3 pcs. a 2 metre long)
Art: 100120 Sheet metal sleeve (6 pcs.)
Art: 100159 Adjusting screw M 6 ( thread length 24 mm ) ( 3 pcs. )
Art: 100350 Nut M 6 DIN 439 narrow version (6 pcs.)
Art: 100073 Soldering nipple length diameter 3,2 x5 mm ( 3 pcs. )
Art: 101413 Soldering nipple cross diameter 6×6 mm ( 3 pcs. )
Art: 101414 Soldering nipple cross diameter 6×4 mm ( 3 pcs. )
Art: 101415 Soldering nipple cross diameter 6×7 mm ( 3 pcs. )
details
100.91 €incl. 19% VAT
plus shipping
Add to basket -

Dead man’s lever mechanical Tube 25 mm
SKU: 102643Mechanical dead man’s lever, stroke 15 mm for pipe diameter 25 mm
Colour : BlackTechnical data :
Lever length : 145 mm
Stroke : 15 mm
Screw-on tube diameter : 25 mm
Lever colour : Black
Set screw : M 6
Suitable accessories :
Art :100172 or 100173 Galvanised steel cable 2 mm
Art : 102642 Solder nipple cross diameter 7.8 mm x length 15 mm
Art : 100193 Bowden cable sheath 6mm outer diameter with inner tube
Art : 100124 plug together with 102309 sheet metal sleeves
details
20.69 €incl. 19% VAT
plus shipping
Add to basket -

Manual crimping tool for rope ends from 4 – 8 mm
SKU: 101440Manual crimping tool for rope ends
For use in a vice
With this pressing tool, threaded rods and eyelets can be pressed quickly and easily.
Application :
– Insert the tool in the vice
– Push the part to be pressed onto the rope
– Press on 2 notches at the beginning and end of the rope and then press on again in the center of the notches, rotated by 180 °
The depth of the notches and thus the strength of the pressing depends on the type of rope and the part to be pressed. We point out that it is a tool for non-safety-relevant parts.
details
25.93 €incl. 19% VAT
plus shipping
Add to basket -

Ferrule
SKU: 100951Ferrule for Rope 1.5 mm
Dimensions:
Bore 1.8 oval
Width of oval bore 3.6 mm
Wall thickness 1.05 mm
Length 6 mm
details
1.77 €incl. 19% VAT
plus shipping
Add to basket









