Operating Lever

For maximum operating force up to 500N. For round strand and round rope up to D = 2mm according to DIN71984, part 1 and part 2. Cable outer according to DIN71984, part 3. Cable attachment with solder and press nipple. Connection D = M8 or 6.5mm. Connecting nipple-D = 8 * 9.

All models with D = 22mm, 25mm or 28mm mountable. Clamp for tube 22 mm is included.

Clamp and screw loose.

Materials: joint piece and mounting clamp made of fine zinc cast alloy. Hand lever made of glass fiber reinforced plastic.

Designation: 90.50 BK / KSZ / L

Stroke: 24mm + – 1mm

Gear ratio (i): 1: 3.6

max. holding force: 500N

A = 160mm B = 6.5mm C = 16mm

Pawl catch after ..mm stroke self-triggering at 22mm

Return spring: no

Switch: no

For maximum cable pull up to 375N. For round strand and round rope up to D = 2mm according to DIN71984, part 1 and part 2. Cable outer according to DIN71984, part 3. Cable attachment with solder and press nipple. Connecting nipple-D = 7 * 7 mm

Materials: joint piece and mounting clamp made of fine zinc cast alloy. Hand lever made of glass fiber reinforced plastic black (KSZ).

Surfaces: joint piece and mounting clamp painted black (LS).

Designation: 102.102LS / KSZ

Stroke: 16mm + – 1mm

Gear ratio (i): 1: 4

max. holding force: 375N

Lever length: 126mm

Pipe D = 22mm

Connection D = 6.5mm

Free rope length = 17mm + -1mm

Pawl catch after ..mm stroke self-triggering at 13.5mm