Regulating Lever

For maximum actuation force up to 120N. Pull actuation: for round strands and round strand ropes up to D=1.6mm according to DIN71984, part 1 and part 2.

Pull and push actuation: for steel wire up to D1.6mm according to DIN2076. Wire housing according to DIN71984, Part 3. Wire attachment with soldering or press nipple in the gear rack.

Connection D=6.5mm or Rd5.

Materials: Housing and cover made of fine zinc cast alloy. Hand lever made of fine zinc cast alloy or wrought aluminum alloy.

Surfaces: bright (BK)

Designation: 16RP13 BK< p>

Stroke: 28mm +/-1mm

Transmission ratio (i): 1:4.3

max. holding force: 70N

A =100° B=80mm C=30mm D=31mm E=41.5mm F=14mm

Imprint ‘max’

For maximum actuation force up to 100N. For round strand and round rope up to D = 2.0mm according to DIN71984, part 1 and part 2.

Cable outer according to DIN71984, part 3. Cable attachment with solder and press nipple.

Connection D = 6.5mm.

Materials: Housing and hand lever made of fine zinc cast alloy

Surfaces: bright (BK)

Designation: 14ARA / 22 BK

Stroke: 42mm +/- 1mm

Gear ratio (i): 1: 4.5

max. holding force: 170N

A = 150 ° B = 84mm C = 24mm D = 43mm E = 31mm F = 22mm

Pipe D = 22mm

Detent at stroke +/- 1mm: 1.7 3.4 …

25 catches