Regulating Lever

For maximum actuation force up to 120N. Pull actuation: for round strands and round strand ropes up to D=1.6mm according to DIN71984, part 1 and part 2.

Pull and push actuation: for steel wire up to D1.6mm according to DIN2076. Wire housing according to DIN71984, Part 3. Wire attachment with soldering or press nipple in the gear rack.

Connection D=6.5mm or Rd5.

Materials: Housing and cover made of fine zinc cast alloy. Hand lever made of fine zinc cast alloy or wrought aluminum alloy.

Surfaces: bright (BK)

Designation: 16RP13 BK< p>

Stroke: 28mm +/-1mm

Transmission ratio (i): 1:4.3

max. holding force: 70N

A =100° B=80mm C=30mm D=31mm E=41.5mm F=14mm

Imprint ‘max’

For maximum operating force up to 120N. Pull control: for round strand and round rope up to D = 1.6mm according to DIN71984, part 1 and part 2.

Pull and push control: for steel wire up to D = 1.6mm according to DIN2076. Cable outer according to DIN71984, part 3. Rope attachment with solder or press nipple in the rack.

Connection D = 6.5mm or Rd5.

Materials: Housing and lid made of fine zinc cast alloy. Hand lever made of fine zinc cast alloy or wrought aluminum alloy.

Surfaces: bright (BK)

Designation: 16RSA3 / 25 BK

Stroke: 33mm +/- 1mm

Gear ratio (i): 1: 4.3

max. holding force: 50N

A = 118 ° B = 80mm C = 32mm D = 31mm E = 41mm F = 16mm G = 25mm

Pipe D = 25mm

Stroke limit with stop pin