Go to Cart 0.00 €
0
Threaded Rod M 10
Showing all 5 results
-
Manual crimping tool for rope ends from 4 – 8 mm
SKU: 101440Manual crimping tool for rope ends
For use in a vice
With this pressing tool, threaded rods and eyelets can be pressed quickly and easily.
Application :
– Insert the tool in the vice
– Push the part to be pressed onto the rope
– Press on 2 notches at the beginning and end of the rope and then press on again in the center of the notches, rotated by 180 °
The depth of the notches and thus the strength of the pressing depends on the type of rope and the part to be pressed. We point out that it is a tool for non-safety-relevant parts.
details
22.97 €incl. 16% VAT
plus shipping
Add to basket -
Threaded Rod M 10 x100 Bore 5.8 mm
SKU: 101216Threaded rod: M10 x 100 mm
Material: steel galvanized
Dimensions:
Thread: M 10
Thread length in mm: 60
Overall length in mm: 100
Bore diameter in mm: 5.8
Hole depth in mm: 30
Shaft diameter in mm: 10
details
4.12 €incl. 16% VAT
plus shipping
Add to basket -
Threaded Rod M 10 x65 Bore 3.1 mm
SKU: 101218Threaded rod: M10 x 65 mm
Material: steel galvanized
Dimensions:
Thread: M 10
Thread length in mm: 45
Overall length in mm: 65
Bore diameter in mm: 3.1
Hole depth in mm: 20.5
Shaft diameter in mm: 9
details
3.77 €incl. 16% VAT
plus shipping
Add to basket -
Threaded Rod M 10 x80 Bore 4.1 mm
SKU: 101217Threaded rod: M10 x 80 mm
Material: steel galvanized
Dimensions:
Thread: M 10
Thread length in mm: 50
Overall length in mm: 80
Bore diameter in mm: 4.1
Bore depth in mm: 23
Shaft diameter in mm: 8
Special features: slot on the thread (slot width 2 mm depth 3 mm)
details
4.06 €incl. 16% VAT
plus shipping
Add to basket -
Threaded Rod M10 x 75 Bore 4.3 mm
SKU: 101270Threaded rod: M10 x 75 mm
Material: steel galvanized
Dimensions:
Thread: M 10
Thread length in mm: 33
Overall length in mm: 75
Bore diameter in mm: 4.3
Hole depth in mm: 20.5
Shaft diameter in mm: 10.0
details
2.20 €incl. 16% VAT
plus shipping
Add to basket