Go to Cart 0.00 €
0
Press and Cutting Tools
Showing all 5 results
-
Manual crimping tool for rope ends from 4 – 8 mm
SKU: 101440Manual crimping tool for rope ends
For use in a vice
With this pressing tool, threaded rods and eyelets can be pressed quickly and easily.
Application :
– Insert the tool in the vice
– Push the part to be pressed onto the rope
– Press on 2 notches at the beginning and end of the rope and then press on again in the center of the notches, rotated by 180 °
The depth of the notches and thus the strength of the pressing depends on the type of rope and the part to be pressed. We point out that it is a tool for non-safety-relevant parts.
details
23.09 €incl. 19% VAT
plus shipping
Add to basket -
Hand crimping pliers for crimping T01-T2.5
SKU: 101345Hand crimping pliers for pressing clamps
3-die pliers (3.0 mm 4.0 mm 5.0 mm)
Application for crimping the ropes:
1.0 mm, 1.5 mm, 2.0 mm, 2.5 mm
Caution :
The hand-held pliers are only intended for the use of non-safety-relevant pressings and a small number of pressings.
details
172.51 €incl. 19% VAT
plus shipping
Add to basket -
Sailing pliers STGL for pressing T01-T3.5
SKU: 101364Glider pliers for press clamps for highest loads
1 – 3.5 mm wire ropes
Please refer to the instructions for use to achieve maximum strength.
this is included with the pliers.
details
540.12 €incl. 19% VAT
plus shipping
Add to basket -
Sailing pliers STGS for pressing T04- T4.5
SKU: 101407Glider pliers for press clamps for highest loads
4 – 4.5 mm wire ropes
Please refer to the instructions for use to achieve maximum strength.
this is included with the pliers.
details
512.09 €incl. 19% VAT
plus shipping
Add to basket -
Steel cable shear diameter up to 4.5 mm
SKU: 101346Wire rope cutter type CC
Rope diameter up to approx. 2.5 mm wire ropes
details
35.68 €incl. 19% VAT
plus shipping
Add to basket