Go to Cart 0.00 €
0
Wire Rope Hoist Distributors
Showing all 10 results
-
Cable Distributor For 3 mm Cable Sturdy Design
SKU: 101771Cable distributor for 3 mm cable, stable design
Material Niro (1.4301)Technical information on the item and accessories:
Item number for Set with screws and threads : Art : (101772)
Recommended rope : 3 mm rope 1×19 galvanized ( Art. No. : 100203 )
Recommended sheath : Flat wire spiral with inner tube ( Art. No. 100202)< br />
Reference dimensions :Carrier :
Total length : 190 mm
Front width : 45 mm
Back width : 65 mm
Component height: 35 mm
Material thickness: 3 mm
Hole diameter on the holder: 14 mm
Hole spacing at the back: 40 mm
Distance of screwing holes at the back: 40 mm for M 6
Distance between screwing holes at front: 30 mm for M 6
Distance between screwing holes at rear in front: 153 mmSliding carriage:
Bore diameter 6.5 mm 2x for rope attachment
Hole diameter 9 mm 1x for rope attachment
Hole spacing: 40 mm
Material thickness 3 mmOther information:
Stroke: approx. 60 mm
Caution: assembly of the sliding carriage as shown in the picture.
The long flange of the sliding carriage must point with the large holes to the underside of the carrier and the long tab must point to the side with the 2 mounting holes.
details
64.49 €incl. 19% VAT
plus shipping
Add to basket -
Set Of Screw Connections For Cable Distributor 101771
SKU: 101772Set of screw connections for cable distributor 101771
Consisting of:
2x End terminal M 6 x38
4x nut DIN 239 M6
1x end terminal M 8 x 108 (can be shortened as desired)
2x nut DIN 439 M 8
3x sheet metal end sleeve for Bowden cable sleeves
3x adjusting screw M 12
6x nut DIN 439 M 12Tip :
Suitable cable and sleeve would be :
Rope: 100203 (rope 3 mm construction 1×19) ART No.: 100203
Bowden cable sheath: 10 mm with inner tube Art. No. 100202details
57.62 €incl. 19% VAT
plus shipping
Add to basket -
Throttle cable distributor round with screw cap stroke 45 mm 1 to 3 cables
SKU: 102831Cable pull distributor with screw cap
Stroke 45 mm
1 input with M 6 adjusting screw
3 outlets with 6.5 mm hole
Holder for solder nipple in slider D = 3.2 mm L = 5.0 mm
Suitable attachments :
Cable 1.5 mm ( 100174 or 100175 )
Bowden cable sleeve ( 100190 )
End sleeves ( 100120 )
Solder nipple ( 100073 )
details
34.87 €incl. 19% VAT
plus shipping
Add to basket -
Throttle cable distributor round with screw cap stroke 45 mm 1 to 2 cables
SKU: 102832Cable pull distributor with screw cap
Stroke 45 mm
1 input with set screw M 6
2 outlets with 6.5 mm hole
Holder for solder nipple in slider D = 3.2 mm L = 5.0 mm
Suitable attachments :
Cable 1.5 mm ( 100174 or 100175 )
Bowden cable sleeve ( 100190 )
End sleeves ( 100120 )
Solder nipple ( 100073 )
details
24.63 €incl. 19% VAT
plus shipping
Add to basket -
Duo Control ( Or actuation )
SKU: 102477DuoControl actuation is a cable pull distributor that actuates 1 cable from 2 different points.
This can also be described as an or actuation.
Technical information :
The DuoControl has a stroke of 15 mm
The housing is made of galvanised steel
The lower sliding sleeve is made of stainless steel and is mounted in a Teflon-coated sliding bush.
Functionality :
1 actuation :
The upper cable, which goes into the adjusting screw, is actuated by means of a handle, causing the cable to contract and push the small slide with the spring and ball in the direction of the adjusting screw. This pulls back the black cover underneath and the single cable that goes out to the right is shortened and thus actuated.
2 Actuation :
The handle on the lower black cover is actuated and the cable that goes out to the right is pulled directly and thus actuated.
Matching accessories :
100190 Bowden cable cover 5 mm
100174 Wire rope 1.5 mm 1×19
100544 Wire rope with ball 5 mm
100121 Sheet metal sleeve (2x)
For the connection, e.g. operating handles and locking bolts can be used.
If you have any technical questions, please contact our technician 074238752573
details
61.68 €incl. 19% VAT
plus shipping
Add to basket -
Kit from Duo Control ( Or actuation )
SKU: 102485The DuoControl actuation kit is a cable pull distributor that actuates 1 cable from 2 different points.
This can also be described as an or actuation.
Technical information :
The DuoControl has a stroke of 15 mm
The housing is made of galvanised steel
The lower sliding sleeve is made of stainless steel and is mounted in a Teflon-coated sliding bush.
Functionality :
1 actuation :
The upper cable, which goes into the adjusting screw, is actuated by means of a handle, causing the cable to contract and push the small slide with the spring and ball in the direction of the adjusting screw. This pulls back the black cover underneath and the single cable that goes out to the right is shortened and thus actuated.
2 Actuation :
The handle on the lower black cover is actuated, which pulls the rope that goes out to the right directly and thus actuates it.
The kit consists of :
1 pc. 102477 Duo Control assembly
3 pcs. 1.5 metres each 100190 Bowden cable sheath 5 mm
4 metres 100174 Wire rope 1.5 mm 1×19
1 pc.100544 Wire rope with ball 5 mm
2 pcs. 100121 Sheet metal sleeve
For the connection, e.g. operating handles and locking bolts can be used.
If you have any technical questions, please contact our technician 074238752573
details
96.50 €incl. 19% VAT
plus shipping
Add to basket -
Brake Cable Disributor Hub 25mm max
SKU: 101203Bowden cable distributor hub 25 mm max.
1 Entrance with bore 6.2 mm
2 Exits with bore 6.2 mm
e. g. usable adjusting screw or attachment sleeves.
Matching Rope Diameters: Up to 2.5 mm
Max. Intake diameter in slider for rope nipples: D = 6.7 mm L = 5.5 mm
e.g. usable ropes with balls 5 mm or 6 mm
details
33.00 €incl. 19% VAT
plus shipping
Add to basket -
Cable Pull Distributor Plastic Black Hub 30
SKU: 101233Cable Pull Distributor
1 Entrance (Bore 6.2 mm)
2 Exits (Bore 6.2 mm)
Rope Diameter Up to 1.5 mm
Matching Attachments:
Rope 1.5 mm (100174 or 100175)
Bowden Cable Outer (100190)
Metal Sleeve (100120)
Soldering Nipple (100073)
details
7.57 €incl. 19% VAT
plus shipping
Add to basket -
Cable Pull Distributor Slider Hub 30 mm
SKU: 101201Bowden cable distributor 30 mm hub
1 Entrance with adjusting screw M 6
2 Exits
Matching Attachments:
Rope 1.5 mm (100174 or 100175)
Bowden Cable Outer (100190)
Metal Sleeve (100120)
Soldering Nipple (100073)
details
152.96 €incl. 19% VAT
plus shipping
Add to basket -
Cable Pull Distributor Slider Hub 45 mm
SKU: 101202Bowden cable distributor hub 45 mm
1 Entrance with adjusting screw M 6
2 Exits
Matching Attachments:
Rope 1.5 mm (100174 or 100175)
Bowden Cable Outer (100190)
Metal Sleeve (100120)
Soldering Nipple (100073)
details
168.43 €incl. 19% VAT
plus shipping
Add to basket