Go to Cart 0.00 €
0
Threaded Rod M 8
Showing all 12 results
-
Manual crimping tool for rope ends from 4 – 8 mm
SKU: 101440Manual crimping tool for rope ends
For use in a vice
With this pressing tool, threaded rods and eyelets can be pressed quickly and easily.
Application :
– Insert the tool in the vice
– Push the part to be pressed onto the rope
– Press on 2 notches at the beginning and end of the rope and then press on again in the center of the notches, rotated by 180 °
The depth of the notches and thus the strength of the pressing depends on the type of rope and the part to be pressed. We point out that it is a tool for non-safety-relevant parts.
details
23.09 €incl. 19% VAT
plus shipping
Add to basket -
Wage Service Pressing On One Side Of The Rope
SKU: 102048We would be happy to press the nipple on one side of your rope.
Please book this service as well if you want us to press the nipple onto your wire or rope.The price refers to 1 rope
When ordering, enter the amount of ropes you want the nipples to be crimped on.When squeezing, the shapes of the nipples change as follows :
Longitudinal nipples / trumpet nipples are pressed as a hexagon.
Cross nipples are pressed on the front side via point pressure, the diameter increases slightly as a result of the pressing.
details
9.47 €incl. 19% VAT
plus shipping
Add to basket -
Threaded rod M8 x 70 drill 2.2 mm
SKU: 102583Threaded rod M 8 x 70 x drill 2.2 mm
Thread length 50 mm
Material galvanised steel
details
2.46 €incl. 19% VAT
plus shipping
Add to basket -
Threaded rod M8 x 50 drill 2.7 mm
SKU: 101613Threaded rod M 8 x 50 x drill 2.7 mm
Material brass
details
2.46 €incl. 19% VAT
plus shipping
Add to basket -
Threaded rod M8 x 70 drill 2.7 mm
SKU: 102582Threaded rod M 8 x 70 x drill 2.7 mm
Thread length 50 mm
Material galvanised steel
details
2.46 €incl. 19% VAT
plus shipping
Add to basket -
Threaded rod M8 x 100 drill 2.7 mm
SKU: 102704Threaded rod M 8 x 100 x drill 2.7 mm
Thread length 80 mm
Total length 100 mm
Drill hole 2.7 mm
Material galvanised steel
details
3.68 €incl. 19% VAT
plus shipping
Add to basket -
Threaded rod M8 x 70 drill 3.2 mm
SKU: 102580Threaded rod M 8 x 70 x drill 3.2 mm
Thread length 50 mm
Total length 70 mm
Hole depth 18 mm
Bore diameter 3.2 mm
Material Galvanised steel
details
2.46 €incl. 19% VAT
plus shipping
Add to basket -
Threaded Rod M 8 x105 Bore 3.5 mm
SKU: 101212Threaded rod: M8 x 105 mm
Material: steel galvanized
Dimensions:
Thread: M 8
Thread length in mm: 74
Overall length in mm: 105
Drilling diameter in mm: 3.5
Hole depth in mm: 20
Shaft diameter in mm: 7
details
3.95 €incl. 19% VAT
plus shipping
Add to basket -
Threaded Rod M 8 x108 Bore 3.9 mm
SKU: 101214Threaded rod: M8 x 108 mm
Material: steel galvanized
Dimensions:
Thread: M 8
Thread length in mm: 73
Overall length in mm: 108
Bore diameter in mm: 3.9
Bore depth in mm: 25
Shaft diameter in mm: 8
details
4.02 €incl. 19% VAT
plus shipping
Add to basket -
Threaded Rod M 8 x75 Bore 3.6 mm
SKU: 101264Threaded rod: M8 x 75 mm
Material: steel galvanized
Dimensions:
Thread: M 8
Thread length in mm: 20
Overall length in mm: 75
Drilling diameter in mm: 3.6
Bore depth in mm: 25
Shank diameter in mm: 6.0
details
3.25 €incl. 19% VAT
plus shipping
Add to basket -
Threaded Rod M 8 x93 Bore 3.9 mm
SKU: 101213Threaded rod: M8 x 93 mm
Material: steel galvanized
Dimensions:
Thread: M 8
Thread length in mm: 58
Overall length in mm: 93
Bore diameter in mm: 3.9
Bore depth in mm: 25
Shaft diameter in mm: 8
Special features: cross hole with 3.6 mm diameter, 5 mm distance from the front
details
3.83 €incl. 19% VAT
plus shipping
Add to basket -
Threaded Rod M8 x 170 Bore 3.6 mm
SKU: 101265Threaded rod: M8 x 170 mm
Material: steel galvanized
Dimensions:
Thread: M 8
Thread length in mm: 25
Overall length in mm: 170
Drilling diameter in mm: 3.6
Bore depth in mm: 24
Shaft diameter in mm: 5.9
details
2.46 €incl. 19% VAT
plus shipping
Add to basket