Regulating Levers

For maximum actuation force up to 100N. For round strand and round rope up to D = 2.0mm according to DIN71984, part 1 and part 2.

Cable outer according to DIN71984, part 3. Cable attachment with solder and press nipple.

Connection D = 6.5mm.

Materials: Housing and hand lever made of fine zinc cast alloy

Surfaces: bright (BK)

Designation: 14AR3 / 25 BK

Stroke: 42mm +/- 1mm

Gear ratio (i): 1: 4.5

max. holding force: 50N

A = 150 ° B = 84mm C = 24mm D = 43mm E = 19mm F = 25mm

Pipe D = 25mm

For maximum actuation force up to 100N. For round strand and round rope up to D = 2.0mm according to DIN71984, part 1 and part 2.

Cable outer according to DIN71984, part 3. Cable attachment with solder and press nipple.

Connection D = 6.5mm.

Materials: Housing and hand lever made of fine zinc cast alloy

Surfaces: bright (BK)

Designation: 14ARF3 BK

Stroke: 42mm +/- 1mm

Gear ratio (i): 1: 4.5

max. holding force: 50N

A = 150 ° B = 84mm C = 25mm D = 43mm E = 19mm

For maximum operating force up to 120N. Pull control: for round strand and round rope up to D = 1.6mm according to DIN71984, part 1 and part 2.

Pull and push control: for steel wire up to D = 1.6mm according to DIN2076. Cable outer according to DIN71984, part 3. Rope attachment with solder or press nipple in the rack.

Connection D = 6.5mm or Rd5.

Materials: Housing and lid made of fine zinc cast alloy. Hand lever made of fine zinc cast alloy or wrought aluminum alloy.

Surfaces: bright (BK)

Designation: 16RSA3 / 25 BK

Stroke: 33mm +/- 1mm

Gear ratio (i): 1: 4.3

max. holding force: 50N

A = 118 ° B = 80mm C = 32mm D = 31mm E = 41mm F = 16mm G = 25mm

Pipe D = 25mm

Stroke limit with stop pin