Threaded rod M 5 x97 drilling 1.9 mm
Threaded rod M 5 x97 drilling 1.9 mm
2.46 €
incl. 19% VAT plus shipping
Threaded rod: M5 x 97 mm
Material: steel galvanized
Dimensions:
Thread: M 5
Thread length in mm: 25
Overall length in mm: 97
Bore diameter in mm: 1.9
Hole depth in mm: 13
Shaft diameter in mm: 4.3
Mengenrabatt / Discount
Bulk Price | Quantity (from) | Quantity (to) |
2.46 € | 1 | 19 |
2.27 € | 20 | 49 |
1.87 € | 50 | 99 |
1.68 € | 100 | 249 |
1.48 € | 250 | 499 |
0.99 € | 500 | 999 |
0.63 € | 1000 |
immediately available
delivery time: 2-5 working days
express delivery after consultation by phone
Related products
-
Manual crimping tool for rope ends from 4 – 8 mm
SKU: 101440Manual crimping tool for rope ends
For use in a vice
With this pressing tool, threaded rods and eyelets can be pressed quickly and easily.
Application :
– Insert the tool in the vice
– Push the part to be pressed onto the rope
– Press on 2 notches at the beginning and end of the rope and then press on again in the center of the notches, rotated by 180 °
The depth of the notches and thus the strength of the pressing depends on the type of rope and the part to be pressed. We point out that it is a tool for non-safety-relevant parts.
details
23.09 €incl. 19% VAT
plus shipping
Add to basket -
Wage Service Pressing On One Side Of The Rope
SKU: 102048We would be happy to press the nipple on one side of your rope.
Please book this service as well if you want us to press the nipple onto your wire or rope.The price refers to 1 rope
When ordering, enter the amount of ropes you want the nipples to be crimped on.When squeezing, the shapes of the nipples change as follows :
Longitudinal nipples / trumpet nipples are pressed as a hexagon.
Cross nipples are pressed on the front side via point pressure, the diameter increases slightly as a result of the pressing.
details
9.47 €incl. 19% VAT
plus shipping
Add to basket -
Threaded rod M 5 x110 drilling 3.4 mm
SKU: 101258Threaded rod: M5 x 110 mm
Material: steel galvanized
Dimensions:
Thread: M 6
Thread length in mm: 25
Overall length in mm: 110
Bore diameter in mm: 3.4
Hole depth in mm: 16
Shaft diameter in mm: 5
details
3.25 €incl. 19% VAT
plus shipping
Add to basket -
Threaded Rod M5 x 39 Bore 1.7 mm
SKU: 101279Threaded Rod: M5 x 39 mm
Material: steel galvanized
Dimensions:
Thread: M 5
Thread length in mm: 25
Total length in mm: 39
Drilling diameter in mm: 1.7
Drilling depth in mm: 10
Shaft diameter in mm: 5
details
2.07 €incl. 19% VAT
plus shipping
Add to basket
Weitere Artikel die Sie interessieren könnten...
-
Manual crimping tool for rope ends from 4 – 8 mm
SKU: 101440Manual crimping tool for rope ends
For use in a vice
With this pressing tool, threaded rods and eyelets can be pressed quickly and easily.
Application :
– Insert the tool in the vice
– Push the part to be pressed onto the rope
– Press on 2 notches at the beginning and end of the rope and then press on again in the center of the notches, rotated by 180 °
The depth of the notches and thus the strength of the pressing depends on the type of rope and the part to be pressed. We point out that it is a tool for non-safety-relevant parts.
details
23.09 €incl. 19% VAT
plus shipping
Add to basket -
Threaded rod M 5 x24 drilling 1.9 mm
SKU: 101205Threaded rod: M 5 x 24 mm
Material: steel galvanized
Dimensions:
Thread: M 5
Thread length in mm: 17
Overall length in mm: 24
Bore diameter in mm: 1.9
Drilling depth in mm: 10
details
2.46 €incl. 19% VAT
plus shipping
Add to basket -
Bowden cable outer
SKU: 100193Bowden cable outer black coated diameter 6.0 mm with inner tube.
Fits to rope diameter 2.0 mm.
details
3.14 €incl. 19% VAT
plus shipping
Add to basket -
Wire Rope
SKU: 100172Rope diameter 2.0 mm galvanized (construction 1×19)
Please enter running meters at order quantity
details
2.44 €incl. 19% VAT
plus shipping
Add to basket -
Adjusting Screw
SKU: 100155Adjusting screw, brass, nickel-plated
G = M6
L = 26mm
I = 20mm
J = 18mm
D = 6mm
d = 3mm
T = 4mm
SW=7mm
details
1.88 €incl. 19% VAT
plus shipping
Add to basket