Go to Cart 1.61 € (incl. VAT)
1
Connecting Parts for Bowden cable outers
Showing 51–75 of 138 results
-
Adjusting screw with M 6 x 30 hole 6.1
SKU: 103028Adjusting screw with M 6 external thread, thread length 30mm, bore 6.1
Total length : 45.5 mm
Hexagon : SW 8
Thread : M 6
Thread length : 30 mm
Hole for Bowden cable housing : 6.1 mm , ( 12 mm deep )
Colour : Black galvanised
Suitable mounting material :
102308 Sheet metal sleeve
100190 Bowden cable housing
details
3.34 €incl. 19% VAT
plus shipping
Add to basket -
Grommet for sleeve 5 mm
SKU: 102970Sealing grommet for Bowden cable housing with outer diameter in mm : 5.0
Bulkhead plate bore in mm : 9.0
Sheet thickness in mm : 2.0
Tip : Drill the bulkhead hole approx. 1 mm larger for better installation
Material properties :
Polychloroprene rubber (rubber)
Temperature resistance : -30 ° to + 90 °
Resistance to : heat, ageing, ozone, oils, greases,
It is also resistant to splashes of petrol and solventsdetails
2.58 €incl. 19% VAT
plus shipping
Add to basket -
Nut M 8 mm with flange galvanised DIN 6923
SKU: 102532Nut M 8 mm with flange galvanised DIN 6923
details
1.26 €incl. 19% VAT
plus shipping
Add to basket -
Adjusting screw with M 6 x 15 hole 7.1
SKU: 103029Adjusting screw with M 6 external thread, thread length 15 mm, bore 7.1
Total length : 31 mm
Hexagon : SW 10
Thread : M 6
Thread length : 15 mm
Hole for holding the Bowden cable housing : 7.1 mm , ( 12 mm deep )
Colour : Black galvanised
Suitable mounting material :
102309 Sheet metal sleeve
100193 Bowden cable housing
details
3.34 €incl. 19% VAT
plus shipping
Add to basket -
Duo Control ( Or actuation )
SKU: 102477DuoControl actuation is a cable pull distributor that actuates 1 cable from 2 different points.
This can also be described as an or actuation.
Technical information :
The DuoControl has a stroke of 15 mm
The housing is made of galvanised steel
The lower sliding sleeve is made of stainless steel and is mounted in a Teflon-coated sliding bush.
Functionality :
1 actuation :
The upper cable, which goes into the adjusting screw, is actuated by means of a handle, causing the cable to contract and push the small slide with the spring and ball in the direction of the adjusting screw. This pulls back the black cover underneath and the single cable that goes out to the right is shortened and thus actuated.
2 Actuation :
The handle on the lower black cover is actuated and the cable that goes out to the right is pulled directly and thus actuated.
Matching accessories :
100190 Bowden cable cover 5 mm
100174 Wire rope 1.5 mm 1×19
100544 Wire rope with ball 5 mm
100121 Sheet metal sleeve (2x)
For the connection, e.g. operating handles and locking bolts can be used.
If you have any technical questions, please contact our technician 074238752573
details
61.68 €incl. 19% VAT
plus shipping
Add to basket -
End Sleeve For Cases With An Outer Diameter Of 14 mm
SKU: 102371End sleeve steel, galvanized
A=20.5mm
W=9.3mm
C=15.9mm
D=14.4 mm suitable for Bowden cable sleeve 14 mm
E=16.9mm
F=0.9mm
details
1.76 €incl. 19% VAT
plus shipping
Add to basket -
Grommet for sleeve 6 mm
SKU: 102971Sealing grommet for Bowden cable housing with outer diameter in mm : 6.0
Bulkhead plate bore in mm : 9.0
Sheet thickness in mm : 1.0
Tip : Drill the bulkhead hole approx. 1 mm larger for better installation
Material properties :
Polychloroprene rubber (rubber)
Temperature resistance : -30 ° to + 90 °
Resistance to : heat, ageing, ozone, oils, greases,
It is also resistant to splashes of petrol and solventsdetails
1.61 €incl. 19% VAT
plus shipping
Add to basket -
Adjusting screw with M 6 x 20 hole 7.1
SKU: 103030Adjusting screw with M 6 external thread, thread length 20mm, bore 7.1
Total length : 35.5 mm
Hexagon : SW 10
Thread : M 6
Thread length : 20 mm
Hole for Bowden cable housing : 7.1 mm , ( 12 mm deep )
Colour : Black galvanised
Suitable mounting material :
102309 Sheet metal sleeve
100193 Bowden cable housing
details
3.34 €incl. 19% VAT
plus shipping
Add to basket -
Grommet for sleeve 6 mm
SKU: 102972Sealing grommet for Bowden cable housing with outer diameter in mm : 6.0
Bulkhead plate bore in mm : 9.0
Sheet thickness in mm : 1.5
Tip : Drill the bulkhead hole approx. 1 mm larger for better installation
Material properties :
Polychloroprene rubber (rubber)
Temperature resistance : -30 ° to + 90 °
Resistance to : heat, ageing, ozone, oils, greases,
It is also resistant to splashes of petrol and solventsdetails
1.61 €incl. 19% VAT
plus shipping
Add to basket -
Kit from Duo Control ( Or actuation )
SKU: 102485The DuoControl actuation kit is a cable pull distributor that actuates 1 cable from 2 different points.
This can also be described as an or actuation.
Technical information :
The DuoControl has a stroke of 15 mm
The housing is made of galvanised steel
The lower sliding sleeve is made of stainless steel and is mounted in a Teflon-coated sliding bush.
Functionality :
1 actuation :
The upper cable, which goes into the adjusting screw, is actuated by means of a handle, causing the cable to contract and push the small slide with the spring and ball in the direction of the adjusting screw. This pulls back the black cover underneath and the single cable that goes out to the right is shortened and thus actuated.
2 Actuation :
The handle on the lower black cover is actuated, which pulls the rope that goes out to the right directly and thus actuates it.
The kit consists of :
1 pc. 102477 Duo Control assembly
3 pcs. 1.5 metres each 100190 Bowden cable sheath 5 mm
4 metres 100174 Wire rope 1.5 mm 1×19
1 pc.100544 Wire rope with ball 5 mm
2 pcs. 100121 Sheet metal sleeve
For the connection, e.g. operating handles and locking bolts can be used.
If you have any technical questions, please contact our technician 074238752573
details
96.50 €incl. 19% VAT
plus shipping
Add to basket -
Special motorbike sleeve, outer 5.8 mm x length 8.3 mm x small bore 2.5 mm x large bore 5.1 mm
SKU: 102308Special sleeve motorbike outer 5.8 mm x length 8.3 mm x small bore 2.5 mm x large bore 5.1 mm
Material CUZn38Pb2 F41This sleeve is a special sleeve and is suitable for use in adjusting screws that are secured against slipping out of the motorbike.
Tip :
for the sleeve to be used :
100190 Bowden cable sleeve 5 mm with inner tube
or
100580 Bowden cable sleeve 5 mm without inner tube
details
2.19 €incl. 19% VAT
plus shipping
Add to basket -
Adjusting screw with M 6 x 30 hole 7.1
SKU: 103031Adjusting screw with M 6 external thread, thread length 30mm, bore 7.1
Total length : 45.5 mm
Hexagon : SW 10
Thread : M 6
Thread length : 30 mm
Hole for Bowden cable housing : 7.1 mm , ( 12 mm deep )
Colour : Black galvanised
Suitable mounting material :
102309 Sheet metal sleeve
100193 Bowden cable housing
details
3.34 €incl. 19% VAT
plus shipping
Add to basket -
Grommet for sleeve 6 mm
SKU: 102973Sealing grommet for Bowden cable housing with outer diameter in mm : 6.0
Bulkhead plate bore in mm : 9.0
Sheet thickness in mm : 2.0
Tip : Drill the bulkhead hole approx. 1 mm larger for better installation
Material properties :
Polychloroprene rubber (rubber)
Temperature resistance : -30 ° to + 90 °
Resistance to : heat, ageing, ozone, oils, greases,
It is also resistant to splashes of petrol and solventsdetails
1.61 €incl. 19% VAT
plus shipping
Add to basket -
Special motorbike sleeve outer 6.7 mm x length 8.1 mm x small bore 3.0 mm x large bore 6.1 mm
SKU: 102309Special motorbike sleeve outer 6.7 mm x length 8.1 mm x small bore 3.0 mm x large bore 6.1 mm
Material CUZn38Pb2 F41This sleeve is a special sleeve and is suitable for use in adjusting screws that are secured against slipping out of the motorbike.
Tip :
for the sleeve to be used :
100193 Bowden cable sleeve 6 mm with inner tube
or
101434 Bowden cable sleeve 6 mm without inner tube
details
2.19 €incl. 19% VAT
plus shipping
Add to basket -
Grommet for sleeve 6 mm
SKU: 102974Sealing grommet for Bowden cable housing with outer diameter in mm : 6.0
Bulkhead plate bore in mm : 9.0
Sheet thickness in mm : 3.0
Tip : Drill the bulkhead hole approx. 1 mm larger for better installation
Material properties :
Polychloroprene rubber (rubber)
Temperature resistance : -30 ° to + 90 °
Resistance to : heat, ageing, ozone, oils, greases,
It is also resistant to splashes of petrol and solventsdetails
1.61 €incl. 19% VAT
plus shipping
Add to basket -
Grommet for sleeve 6 mm
SKU: 102975Sealing grommet for Bowden cable housing with outer diameter in mm : 6.0
Bulkhead plate bore in mm : 10.0
Sheet thickness in mm : 1.0
Tip : Drill the bulkhead hole approx. 1 mm larger for better installation
Material properties :
Polychloroprene rubber (rubber)
Temperature resistance : -30 ° to + 90 °
Resistance to : heat, ageing, ozone, oils, greases,
It is also resistant to splashes of petrol and solventsdetails
1.61 €incl. 19% VAT
plus shipping
Add to basket -
Special motorbike sleeve outer 7.8 mm x length 12 mm x small bore 4.0 mm x large bore 7.1 mm
SKU: 102498Special motorbike sleeve outer 7.8 mm x length 12 mm x small bore 4.0 mm x large bore 7.1 mm
Material CUZn38Pb2 F41This sleeve is a special sleeve and is suitable for use in adjusting screws that are secured against slipping out of the motorbike.
Tip :
for the sleeve to be used :
101435 Bowden cable sleeve 7 mm with inner tube
or
100210 Bowden cable sleeve 7 mm without inner tube
details
2.19 €incl. 19% VAT
plus shipping
Add to basket -
Grommet for sleeve 6 mm
SKU: 102976Sealing grommet for Bowden cable housing with outer diameter in mm : 6.0
Bulkhead plate bore in mm : 10.0
Sheet thickness in mm : 1.5
Tip : Drill the bulkhead hole approx. 1 mm larger for better installation
Material properties :
Polychloroprene rubber (rubber)
Temperature resistance : -30 ° to + 90 °
Resistance to : heat, ageing, ozone, oils, greases,
It is also resistant to splashes of petrol and solventsdetails
1.61 €incl. 19% VAT
plus shipping
Add to basket -
Grommet for sleeve 6 mm
SKU: 102977Sealing grommet for Bowden cable housing with outer diameter in mm : 6.0
Bulkhead plate bore in mm : 10.0
Sheet thickness in mm : 2.0
Tip : Drill the bulkhead hole approx. 1 mm larger for better installation
Material properties :
Polychloroprene rubber (rubber)
Temperature resistance : -30 ° to + 90 °
Resistance to : heat, ageing, ozone, oils, greases,
It is also resistant to splashes of petrol and solventsdetails
1.61 €incl. 19% VAT
plus shipping
Add to basket -
Grommet for sleeve 6 mm
SKU: 102978Sealing grommet for Bowden cable housing with outer diameter in mm : 6.0
Bulkhead plate bore in mm : 12.0
Sheet thickness in mm : 1.0
Tip : Drill the bulkhead hole approx. 1 mm larger for better installation
Material properties :
Polychloroprene rubber (rubber)
Temperature resistance : -30 ° to + 90 °
Resistance to : heat, ageing, ozone, oils, greases,
It is also resistant to splashes of petrol and solventsdetails
1.61 €incl. 19% VAT
plus shipping
Add to basket -
Grommet for sleeve 6 mm
SKU: 102979Sealing grommet for Bowden cable housing with outer diameter in mm : 6.0
Bulkhead plate bore in mm : 12.0
Sheet thickness in mm : 1.5
Tip : Drill the bulkhead hole approx. 1 mm larger for better installation
Material properties :
Polychloroprene rubber (rubber)
Temperature resistance : -30 ° to + 90 °
Resistance to : heat, ageing, ozone, oils, greases,
It is also resistant to splashes of petrol and solventsdetails
1.61 €incl. 19% VAT
plus shipping
Add to basket -
Nut M 14×1.5 DIN 439 galvanised
SKU: 102474Nut M 14 x 1.5 DIN 439 galvanised blue
details
1.48 €incl. 19% VAT
plus shipping
Add to basket -
Grommet for sleeve 6 mm
SKU: 102980Sealing grommet for Bowden cable housing with outer diameter in mm : 6.0
Bulkhead plate bore in mm : 12.0
Sheet thickness in mm : 2.0
Tip : Drill the bulkhead hole approx. 1 mm larger for better installation
Material properties :
Polychloroprene rubber (rubber)
Temperature resistance : -30 ° to + 90 °
Resistance to : heat, ageing, ozone, oils, greases,
It is also resistant to splashes of petrol and solventsdetails
1.61 €incl. 19% VAT
plus shipping
Add to basket -
Grommet for sleeve 7 mm
SKU: 102981Sealing grommet for Bowden cable housing with outer diameter in mm : 7.0
Bulkhead plate bore in mm : 12.0
Sheet thickness in mm : 1.0
Tip : Drill the bulkhead hole approx. 1 mm larger for better installation
Material properties :
Polychloroprene rubber (rubber)
Temperature resistance : -30 ° to + 90 °
Resistance to : heat, ageing, ozone, oils, greases,
It is also resistant to splashes of petrol and solventsdetails
2.09 €incl. 19% VAT
plus shipping
Add to basket -
Grommet for sleeve 7 mm
SKU: 102982Sealing grommet for Bowden cable housing with outer diameter in mm : 7.0
Bulkhead plate bore in mm : 12.0
Sheet thickness in mm : 1.5
Tip : Drill the bulkhead hole approx. 1 mm larger for better installation
Material properties :
Polychloroprene rubber (rubber)
Temperature resistance : -30 ° to + 90 °
Resistance to : heat, ageing, ozone, oils, greases,
It is also resistant to splashes of petrol and solventsdetails
2.09 €incl. 19% VAT
plus shipping
Add to basket