Throttle cable distributor round with screw cap stroke 45 mm 1 to 2 cables

DuoControl actuation is a cable pull distributor that actuates 1 cable from 2 different points.

This can also be described as an or actuation.

Technical information :

The DuoControl has a stroke of 15 mm

The housing is made of galvanised steel

The lower sliding sleeve is made of stainless steel and is mounted in a Teflon-coated sliding bush.

Functionality :

1 actuation :

The upper cable, which goes into the adjusting screw, is actuated by means of a handle, causing the cable to contract and push the small slide with the spring and ball in the direction of the adjusting screw. This pulls back the black cover underneath and the single cable that goes out to the right is shortened and thus actuated.

2 Actuation :

The handle on the lower black cover is actuated and the cable that goes out to the right is pulled directly and thus actuated.

Matching accessories :

100190 Bowden cable cover 5 mm

100174 Wire rope 1.5 mm 1×19

100544 Wire rope with ball 5 mm

100121 Sheet metal sleeve (2x)

For the connection, e.g. operating handles and locking bolts can be used.

If you have any technical questions, please contact our technician 074238752573

Cable pull distributor with screw cap

Stroke 45 mm

1 input with M 6 adjusting screw

3 outlets with 6.5 mm hole

Holder for solder nipple in slider D = 3.2 mm L = 5.0 mm

Suitable attachments :

Cable 1.5 mm ( 100174 or 100175 )

Bowden cable sleeve ( 100190 )

End sleeves ( 100120 )

Solder nipple ( 100073 )