Thank you!
Press Nipple Longitudinal Form DxLxW 7.0×10.5×1.7 was added successfully to your cart.
Ring eye 5.1 mm
Ring eye 5.1 mm
6.64 €
incl. 19% VAT plus shipping
Ring eye with eye diameter 5.1 mm suitable for rope 1.5 mm
Eye diameter: 5.1 mm
Eye width: 4 mm
Overall length: 18.5 mm
Shaft diameter: 5 mm
Hole for rope: 1.7 mm
Hole depth: 8.5 mm
Mengenrabatt / Discount
| Bulk Price | Quantity (from) | Quantity (to) |
| 6.64 € | 1 | 49 |
| 6.12 € | 50 | 99 |
| 5.62 € | 100 | 249 |
| 3.22 € | 250 | 499 |
| 2.87 € | 500 | 999 |
| 1.46 € | 1,000 | ∞ |
immediately available
delivery time: 2-5 working days
express delivery after consultation by phone
Related products
-

Eyelet
SKU: 100939Eyelet suitable for rope 1.5 mm
Dimensions:
Total length 33.5 mm
Eye width 16 mm
Eye thickness 4 mm
Bore Eye 7 mm
Suitable for rope 1.5 mm (bore 1.9 mm)
Shaft diameter 6 mm
details
5.64 €incl. 19% VAT
plus shipping
Add to basket -

Manual crimping tool for rope ends from 4 – 8 mm
SKU: 101440Manual crimping tool for rope ends
For use in a vice
With this pressing tool, threaded rods and eyelets can be pressed quickly and easily.
Application :
– Insert the tool in the vice
– Push the part to be pressed onto the rope
– Press on 2 notches at the beginning and end of the rope and then press on again in the center of the notches, rotated by 180 °
The depth of the notches and thus the strength of the pressing depends on the type of rope and the part to be pressed. We point out that it is a tool for non-safety-relevant parts.
details
24.47 €incl. 19% VAT
plus shipping
Add to basket -

Ring eye 4.5 mn
SKU: 101501Ring eyelet with eye diameter 4.5mm suitable for rope 1.5 mm
Eye diameter: 4.5 mm
Eye width: 2.0 mm
Overall length: 15.5 mm
Shaft diameter: 4.5 mm
Hole for rope: 1.7 mm
Hole depth: 6.0 mm
details
6.51 €incl. 19% VAT
plus shipping
Add to basket -

Eyelets
SKU: 100938Eyelet with bore 5 mm suitable for rope 1,0 mm, 1,25 mm, 1,5 mm, 2 mm.
Dimensions:
Total length: 33 mm
Drilling Diameter 5 mm
Head Width: 1.5 mm
Tab width: 10 mm
Material: stainless steel 1,4301
The installation of the eyelet with the rope is very simple. Slide in the rope and the eylet in the vice until the rope lies wave-shaped in the tab. Attention not too strong so that the rope is sheared off.
details
10.33 €incl. 19% VAT
plus shipping
Add to basket
Weitere Artikel die Sie interessieren könnten...
-

Press Nipple Longitudinal Form DxLxW 4.0×6.5×1.7
SKU: 102059Longitudinal press nipple
Material : brass
Surface : blankDiameter in mm: 4.0
Length in mm : 6.5
Bore in mm: 1.7Suggestion for usable rope diameter : 1.5 mm
Please also note our wage service under article number 102048. We will press your nipple like to attach to the rope on one side.
Simply add the wage service item : 102048details
2.65 €incl. 19% VAT
plus shipping
Add to basket -

Press Nipple Longitudinal Form DxLxW 5.0×6.0x1.7
SKU: 102065Longitudinal press nipple
Material : brass
Surface : blankDiameter in mm: 5.0
Length in mm : 6.0
Bore in mm: 1.7Suggestion for usable rope diameter : 1.5 mm
Please also note our wage service under article number 102048. We will press your nipple like to attach to the rope on one side.
Simply add the wage service item : 102048details
2.65 €incl. 19% VAT
plus shipping
Add to basket -

Press Nipple Longitudinal Form DxLxW 7.0×10.5×1.7
SKU: 102077Longitudinal press nipple
Material : brass
Surface : blankDiameter in mm: 7.0
Length in mm : 10.5
Bore in mm: 1.7Suggestion for usable rope diameter: 1.5 mm
Please also note our wage service under article number 102048. We will press your nipple like to attach to the rope on one side.
Simply add the wage service item : 102048details
2.65 €incl. 19% VAT
plus shipping
Add to basket -

Eyelet
SKU: 100291Ring eyelet with eye diameter 6 mm suitable for rope 1.5 mm
details
5.94 €incl. 19% VAT
plus shipping
Add to basket -

Eyelet
SKU: 100302Ring eyelet with eye diameter 5.1mm suitable for rope 1.5 mm
Eye width is 5 mm
Shaft diameter is 5 mm
details
5.94 €incl. 19% VAT
plus shipping
Add to basket










