Thank you!
Eyelet for rope : 2.5 mm was added successfully to your cart.
Eyelets
Eyelets
3.95 €
incl. 19% VAT plus shipping
Eyelet with bore 5.4 mm suitable for rope up to 2 mm.
Dimensions:
Total length: 19 mm
Drilling Diameter 5.4 mm
Head Width: 1.1 mm
Head Outside Diameter 8.5 mm
Mengenrabatt / Discount
| Bulk Price | Quantity (from) | Quantity (to) |
| 3.95 € | 1 | 19 |
| 3.83 € | 20 | 49 |
| 3.21 € | 50 | 99 |
| 2.87 € | 100 | 249 |
| 2.19 € | 250 | 499 |
| 1.64 € | 500 | ∞ |
immediately available
delivery time: 2-5 working days
express delivery after consultation by phone
Related products
-

Eyelet
SKU: 100945Eyelet suitable for rope 3.5 mm and 4 mm.
Dimensions:
Total length 34.6 mm
Eye width 16.1 mm
Eye thickness 6.5mm
Bore Eye 8.2 mm
Eyelet suitable for rope 3.5 mm and 4 mm (for 4mm rope, drill out to 4.2mm)
Shaft diameter 8 mm
details
6.12 €incl. 19% VAT
plus shipping
Add to basket -

Eyelets
SKU: 100938Eyelet with bore 5 mm suitable for rope 1,0 mm, 1,25 mm, 1,5 mm, 2 mm.
Dimensions:
Total length: 33 mm
Drilling Diameter 5 mm
Head Width: 1.5 mm
Tab width: 10 mm
Material: stainless steel 1,4301
The installation of the eyelet with the rope is very simple. Slide in the rope and the eylet in the vice until the rope lies wave-shaped in the tab. Attention not too strong so that the rope is sheared off.
details
10.95 €incl. 19% VAT
plus shipping
Add to basket -

Manual crimping tool for rope ends from 4 – 8 mm
SKU: 101440Manual crimping tool for rope ends
For use in a vice
With this pressing tool, threaded rods and eyelets can be pressed quickly and easily.
Application :
– Insert the tool in the vice
– Push the part to be pressed onto the rope
– Press on 2 notches at the beginning and end of the rope and then press on again in the center of the notches, rotated by 180 °
The depth of the notches and thus the strength of the pressing depends on the type of rope and the part to be pressed. We point out that it is a tool for non-safety-relevant parts.
details
25.93 €incl. 19% VAT
plus shipping
Add to basket -

Eyelet for rope : 2.5 mm
SKU: 102047Ring eyes for rope 2.5 mm
Eye diameter :13 mm
Eye width : 4 mm
Head diameter: 20.4 mm
Shaft length: 20 mm
Overall length : 45.5 mm
Cable bore : 2.7 mm
Hole depth: 20 mm
Material : Steel
details
8.84 €incl. 19% VAT
plus shipping
Add to basket
Weitere Artikel die Sie interessieren könnten...
-

Special motorbike sleeve, outer 5.8 mm x length 8.3 mm x small bore 2.5 mm x large bore 5.1 mm
SKU: 102308Special sleeve motorbike outer 5.8 mm x length 8.3 mm x small bore 2.5 mm x large bore 5.1 mm
Material CUZn38Pb2 F41This sleeve is a special sleeve and is suitable for use in adjusting screws that are secured against slipping out of the motorbike.
Tip :
for the sleeve to be used :
100190 Bowden cable sleeve 5 mm with inner tube
or
100580 Bowden cable sleeve 5 mm without inner tube
details
2.32 €incl. 19% VAT
plus shipping
Add to basket -

Drawbar eye 5.0 x 20 x bore 1.4 eye 5.3 for rope 1.25 mm
SKU: 102886Drawbar eye 5.0 x 20 x bore 1.4 eye 5.3
Fits rope 1.25 mm
Material : Free cutting steel
Dimensions :
Total length : 20 mm
Shank length : 9 mm
Shank diameter : 5 mm
Hole eye : 5,3 mm
Eye width : 1.6 mm
Rope bore : 1.4 mm
details
3.78 €incl. 19% VAT
plus shipping
Add to basket -

Bowden cable outer
SKU: 100190Bowden cable outer black coated diameter 5.0 mm with inner tube.
Fits to rope diameter 1.5 mm.
details
3.28 €incl. 19% VAT
plus shipping
Add to basket -

Wire Rope
SKU: 100182Rope diameter 1.5 mm stainless steel (construction 1×19)
Please enter running meters at order quantity
details
4.59 €incl. 19% VAT
plus shipping
Add to basket -

Slotted Adjusting Screw
SKU: 100136Knurled head screw M 6×32 mm long, head bore diameter 6.5 mm, through hole diameter 2.8 mm, slotted, slit width 2.2 mm, mounted with knurled nut M6, D = 12×4 mm, slotted, slit width 2.5 mm, aluminum, bright
made of brass, nickel plated
details
9.70 €incl. 19% VAT
plus shipping
Add to basket










