Mushroom-head (matt) pull handle, size M, 10 x 1, for rope 1.5 / 2.0 mm (wire 1.5 / 2.0 mm)

Handle unit with T-handle for use as a bulkhead fitting

Short design

Technical details:

Stroke: approx. 18 mm

Handle width: 40 mm

Thread: M 10 x 1, length 12 mm

Cable diameter: 1.5 mm / 2 mm (if using 2 mm cable, the bore must be reamed to 2.2 mm)

Spring steel wire diameter (tension/compression): 1.5 mm / 2.0 mm (if using 2 mm wire, the bore must be reamed to 2.2 mm)

Sheath diameter:

for 1.5 mm rope = sheath 5 mm (100190)

for 2 mm rope = sheath 6 mm (100193) Remove approx. 15 mm of the plastic sheath beforehand

Cannot be secured

Handle unit with mushroom-head design for use as a bulkhead fitting

With through-hole thread

Technical details:

Stroke: approx. 50 mm

Mushroom head diameter: 18 mm

Thread: M 10 x 1, length 12 mm

Wire diameter: 1.5 mm / 2 mm

Spring steel wire diameter (tensile/compressive): 1.5 mm / 2.0 mm

Sheath diameter:

for 1.5 mm rope = sheath 5 mm (100190)

for 2 mm rope = sheath 6 mm (100193) Remove approx. 15 mm of the plastic sheath beforehand

Cannot be secured