02 – Clamp 22 mm for universal operating lever Material ALU sandblasted

Universal operating lever

For maximum actuating force up to 500N.

For round strand and round strand rope up to D=2mm according to DIN71984, part 1 and part 2. Rope cover according to DIN71984, part 3. Rope fastening with solder and press nipple. Connection D=M8. Connection nipple D=8*9.

Tube D=22,25,28mm

Locking : without

Clamp and screw loose.

Materials: Joint and fixing clamp made of die-cast aluminium. Hand lever made of glass fibre reinforced plastic.

Designation: Alternative to Magura 90.00 BK/KSZ

Stroke: 24mm +- 1mm

max. holding force: 500N

Connection thread for adjusting screw : M8

3 D data on request

Industrial brake lever not approved for road use

Black universal operating lever

For maximum operating force up to 500 N.

For round wire strands and round wire rope up to D=2 mm in accordance with DIN 71984, Parts 1 and 2. Rope sheath in accordance with DIN 71984, Part 3. Rope attachment using soldered and crimped nipples. Connection: D = M8. Connection nipple cross-section: 8 × 8.

Tube diameter: 22, 25, 28 mm

Locking mechanism: self-releasing pawl

Clamp and screw supplied loose.

Materials: Joint and fixing clamp made of die-cast aluminium. Hand lever made of glass-fibre-reinforced plastic.

Surface finish: black KTL coating

Designation: Alternative to Magura 90.00 BK/KSZ

Stroke: 24 mm ± 1 mm

Max. holding force: 500 N

Connection thread for adjusting screw: M8

3D data available on request

Industrial brake levers not approved for use on public roads