Steel cable shear diameter up to 4.5 mm
Steel cable shear diameter up to 4.5 mm
35.68 €
incl. 19% VAT plus shipping
Wire rope cutter type CC
Rope diameter up to approx. 2.5 mm wire ropes
Mengenrabatt / Discount
Bulk Price | Quantity (from) | Quantity (to) |
35.68 € | 1 |
immediately available
delivery time: 2-5 working days
express delivery after consultation by phone
Related products
-
Sailing pliers STGS for pressing T04- T4.5
SKU: 101407Glider pliers for press clamps for highest loads
4 – 4.5 mm wire ropes
Please refer to the instructions for use to achieve maximum strength.
this is included with the pliers.
details
512.09 €incl. 19% VAT
plus shipping
Add to basket -
Manual crimping tool for rope ends from 4 – 8 mm
SKU: 101440Manual crimping tool for rope ends
For use in a vice
With this pressing tool, threaded rods and eyelets can be pressed quickly and easily.
Application :
– Insert the tool in the vice
– Push the part to be pressed onto the rope
– Press on 2 notches at the beginning and end of the rope and then press on again in the center of the notches, rotated by 180 °
The depth of the notches and thus the strength of the pressing depends on the type of rope and the part to be pressed. We point out that it is a tool for non-safety-relevant parts.
details
23.09 €incl. 19% VAT
plus shipping
Add to basket -
Sailing pliers STGL for pressing T01-T3.5
SKU: 101364Glider pliers for press clamps for highest loads
1 – 3.5 mm wire ropes
Please refer to the instructions for use to achieve maximum strength.
this is included with the pliers.
details
540.12 €incl. 19% VAT
plus shipping
Add to basket -
Hand crimping pliers for crimping T01-T2.5
SKU: 101345Hand crimping pliers for pressing clamps
3-die pliers (3.0 mm 4.0 mm 5.0 mm)
Application for crimping the ropes:
1.0 mm, 1.5 mm, 2.0 mm, 2.5 mm
Caution :
The hand-held pliers are only intended for the use of non-safety-relevant pressings and a small number of pressings.
details
172.51 €incl. 19% VAT
plus shipping
Add to basket
Weitere Artikel die Sie interessieren könnten...
-
Spring Steel Wire
SKU: 100229Spring steel wire 1.5 mm diameter according to DIN EN 10270-1-D1
Recommendation: Longitudinally sheathed outer offers more rigidity during pressure transmission, but only large radii are possible, here the article 100317 fits
For light pressure transfers the flat wire spiral Article: 100190 is sufficient
'
details
2.86 €incl. 19% VAT
plus shipping
Add to basket -
Bowden cable outer
SKU: 100190Bowden cable outer black coated diameter 5.0 mm with inner tube.
Fits to rope diameter 1.5 mm.
details
2.92 €incl. 19% VAT
plus shipping
Add to basket -
Wire Rope
SKU: 100172Rope diameter 2.0 mm galvanized (construction 1×19)
Please enter running meters at order quantity
details
2.44 €incl. 19% VAT
plus shipping
Add to basket -
Adjusting Screw
SKU: 100145Knurled adjusting screw M 6×23.5 mm long, head bore diameter 5.2 mm, through-hole diameter 2.8 mm
made of aluminum, bright
details
1.38 €incl. 19% VAT
plus shipping
Add to basket -
Screw Nipple
SKU: 100033Shank D = 5.5 mm, L = 6 mm made of brass, nickel-plated mounted with threaded pin M 4×5 mm made of galvanized steel, Bore diameter 1.8 mm
details
1.11 €incl. 19% VAT
plus shipping
Add to basket